BlueCat Micetro DNS Management is a DDI solution that orchestrates DNS, DHCP, and IPAM
Configuring the Connector for BlueCat Micetro DNS Management #
To configure Lucidum to ingest data from BlueCat Micetro DNS Management :
-
Log in to Lucidum.
-
In the left pane, click Connector.
-
In the Connector page, click Add Connector.
-
Scroll until you find the Connector you want to configure. Click Connect. The Settings page appears.
-
In the Settings page, enter the following:
-
Host (required). The hostname or IP address of the BlueCat Micetro server.
-
Username (required). User name for a BlueCat Micetro account that has read access to API data. For details on creating user accounts, see https://docs.menandmice.com/en/10.0/guides/user-manual/webapp_user_management/#adding-user-accounts.
-
Password (required). Password for a BlueCat Micetro account that has read access to API data. For details on creating user accounts, see https://docs.menandmice.com/en/10.0/guides/user-manual/webapp_user_management/#adding-user-accounts.
-
Proxy. If you are using a proxy server to allow this connector to communicate with on-premises devices, enter the IP address: port for the proxy server, usually 192.168.255.6:3128.
-
-
To test the configuration, click Test.
-
If the connector is configured correctly, Lucidum displays a list of services that are accessible with the connector.
-
If the connector is not configured correctly, Lucidum displays an error message.
-
API Documentation #
API v10.0.0
